zico plast 60 جرم نسوز پلاستیک 60% آلومینا

عکس ها فایل ها ویدیو ها نظرات


جرم کوبیدنی- پلاستیک فسفاتی نسوز. بر پایه شاموت، بوکسیت و اسید فسفریک، دارای خواص نصبی و کارپذیری بسیار خوب، استحکام حرارتی مناسب و کمترین ترک خوردگی بعد از پخت.


high alumina, phosphate-bonded plastic that offers excellent resistance to alkali attack. Phosphate bonding allows Zico Plast 60 to develop high strength at lower temperatures.
 

ZicoPlast 60

Brand Name

Bauxite-Fireclay

Raw Material
5 Maximum grain size (mm)

Chemical

Type of bond
Ramming Installation method

2.55

Bulk density (g/cm3)

 After drying at 110°C

1550

Maximum service temperature (°C)

    +0.3

Permanent linear change (%)

After firing to 850°C
+1.7

Permanent linear change (%)

After firing to 1400°C



Chemical analysis (%)

P2O5 TiO2 Fe2O3 SiO2 Al2O3
4.3 2.7 1.7 26.7 60.3


Note: The data are averaged results of laboratory test procedures. These are not typical of field samples. The data is subject to reasonable variations and should not be used for specification purposes. No guarantees are implied, as results may vary due to installation techniques, forming methods, and conditions. ISIRI and ASTM procedures are used where applicable. 20/12/2014 is the date this data sheet was updated. Check with Zico sales office to make sure you have a current data sheet, since this technical data may have changed.