zico plast 90 جرم نسوز پلاستیک 90% آلومینا

عکس ها فایل ها ویدیو ها نظرات

جرم نسوز کوبیدنی- پلاستیک فسفاتی. بر پایه آلومینا، بوکسیت و اسید فسفریک، دارای خواص نصبی و کارپذیری بسیار خوب، استحکام حرارتی بسیار مناسب و کمترین تغییر حجم بعد از پخت. 

Based on tabular alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.


ZicoPlast 90

Brand Name

Tabular alumina- bauxite

Raw Material
5 Maximum grain size (mm)


Type of bond
Ramming Installation method


Bulk density (g/cm3)

 After drying at 110°C


Maximum service temperature (°C)


Permanent linear change (%)

After firing to 850°C

Permanent linear change (%)

After firing to 1400°C

Chemical analysis (%)

P2O5 TiO2 Fe2O3 SiO2 Al2O3
3.3 1.1 0.6 1.8 90

Note: The data are averaged results of laboratory test procedures. These are not typical of field samples. The data is subject to reasonable variations and should not be used for specification purposes. No guarantees are implied, as results may vary due to installation techniques, forming methods, and conditions. ISIRI and ASTM procedures are used where applicable. 20/12/2014 is the date this data sheet was updated. Check with Zico sales office to make sure you have a current data sheet, since this technical data may have changed.